正在加載......

Ground edge rules

Ground edge rules

An extremely sharp edge facilitating less cutting pressure produced by a closely controlled, automated edge grinding process that achieves narrow height tolerances, the rules retain good bendability.

Suitable for diecutting plastics, electronics and tough materials

Dieflex® Fine Ground (FG )

A sharp edge with a smooth bright bevel appearance, Dieflex Fine Ground is available in a range of body hardness options to cover all bending and stability requirements. Suitable for diecutting tough materials such as plastic laminated board, plastics (PE, PVC, PP, PET) and many electronic components.


Dieflex® Fine Ground (FG )
Body hardness HV340 HV380 HV400 HV450
Edge hardness ~HV660 ~HV720
Height 20mm~50mm
Point 2pt/0.71mm, 3pt/1.05mm
Bevel type CB / LB / SB / LS
Edge angle 42°,52° (Standard)
30 °, 60°, 75° (Optional)

Dieflex® G12M

A rule for even more demanding materials such as brittle plastics. The very fine ground edge gives improved bendability compared with the standard ground edge rule. The extremely sharp edge means that less cutting pressure is required. There is also the benefit of reduced slivers, swarf and dust.


Dieflex® G12M
Body hardness HV340 HV380
Edge hardness ~HV660
Height 20mm~50mm
Point 2pt/0.71mm, 3pt/1.05mm
Bevel type CB / LB / SB / LS
Edge angle 42°,52° (Standard)
30 °, 60°, 75° (Optional)

Polished

Dieflex® polished edge rules, distinguished by their bright, mirror-like and extremely sharp cutting edge, are suited for use with the most demanding of materials such as electronic components. The extremely smooth edge rules incorporate good bendability, reduced friction during cutting while keeping dust to a minimum.

Dieflex® Razor

Dieflex Razor has an extremely sharp, 30°, polished cutting edge with deep edge hardening and an extra hard stable body. This rule is suitable for heavy duty diecutting of plastic laminated board, plastics (PE, PVC, PP, PET), electronic components and optical materials.

Dieflex® Razor
Body hardness HV450
Edge hardness ~HV720
Height 20mm~25mm
Point 1.5pt/0.53mm, 2pt/0.71mm
Bevel type CB / LB
Edge angle 30°, 42°

Dieflex® Brite

Dieflex Brite combines an extremely sharp polished cutting edge with excellent bendability. A sharp, smooth bevel allows clean diecutting at lower pressures. Suitable for heavy duty diecutting of plastic laminated board, plastics (PE, PVC, PP, PET) and many electronic components.

Dieflex® Brite
Body hardness HV340 HV380
Edge hardness ~HV660
Height 20mm~25mm
Point 2pt/0.71mm, 3pt/1.05mm
Bevel type CB / LB
Edge angle 42°,52°


gotop