Products

Edge hardened cutting rules produced by super high frequency machines offering excellent cutting service life, together with the optimal decarburized raw material are suitable for diecutting application.

We have nine complete sets of 27.12 megahertz high-frequency machines with the most innovative technology made in Germany and Sweden.

Our maximum capacity is 150k meters per day.

Bright edge-hardened shaved rules with no dark scale on the surface are available.

• Normal edge hardened: up to HV660

• Deep edge hardened: up to HV720.

• Perforating rules: up to HV800

• Edge hardness can go up to HV1000 if required.

 

Dieflex®

Dieflex is the original edge hardened cutting rule for optimum wear resistance. Its hard, stable body and decarburized surface gives excellent bendability. It is suitable for diecutting common substrates including solid board and corrugated board.

Dieflex®
Body hardness HV340 HV380 HV400 HV450
Edge hardness ~HV660
Height 22mm~25mm
Point 1.27pt/0.45mm, 1.5pt/0.53mm, 2pt/0.71mm, 3pt/1.05mm, 4pt/1.42mm
Bevel type Center bevel / Long center bevel / Side bevel
Edge angle 42°,52° (Standard)
30 °, 46 °, 60°, 75° (Optional)

 

Dieflex® Deep Edge hardened (DEH)

An extra deep hardened rule tip further improves longevity of cutting life. Its hard, stable body and decarburized surface gives a good level of bendability. It is suitable for diecutting tough abrasive materials.

 

Dieflex® Deep Edge hardened (DEH)
Body hardness HV400
Edge hardness ~HV720
Height 22mm~50mm
Point 2pt/0.71mm, 3pt/1.05mm
Bevel type Center bevel / Long center bevel
Edge angle 42°,52° (Standard)

 

Dieflex® High Rule(HR)

Dieflex High Rule is an original edge hardened cutting rule for optimum wear resistance. Its hard, stable body and decarburized surface gives a good level of bendability. It is suitable for deep and clean diecutting of plastic (PE, PVC, PP, PET) and vacuum formed packaging.

Dieflex® High Rule(HR)
Body hardness HV400
Edge hardness ~HV660
Height 26mm~100mm
Point 2pt/0.71mm, 3pt/1.05mm, 4pt/1.42mm
Bevel type Center bevel / Long center bevel
Edge angle 42°,52° (Standard)

 

 

Saxon® SX340 SX380 SX400
Body hardness HV340 HV380 HV400
Edge hardness ~HV660 ~HV660 ~HV720
Height 22mm~50mm
Point 1.5pt/0.53mm, 2pt/0.71mm, 3pt/1.05mm, 4pt/1.42mm
Bevel type Center bevel / Long center bevel/ Side bevel
Edge angle 42°,52° (Standard)
30°, 46°, 60°, 75° (Optional)

 

  A80,S80 A55x80/S55x80
Body hardness HV360 HV400
Edge hardness ~HV660 ~HV720
Height 22mm~50mm
Point 1.5pt/0.53mm, 2pt/0.71mm, 3pt/1.05mm
Bevel type Center bevel / Long center bevel
Edge angle 42°,52° (Standard)
30°, 46°, 60°, 75° (Optional)

The well-known sharpest shaved rules are produced by three sophisticated shaving machines made in Sweden and Germany.

Our maximum capacity is 200k meters per day.

The shaved sharp edge is our standard.

The shaved round edge with a tiny radius of R=0.016mm for example is also available on request.

Dieflex® Shaved rules
Body hardness HV340 HV380 HV400 HV450
Edge hardness ~HV660 ~HV720
Height 22mm~100mm
Point 1.27pt/0.45mm, 1.5pt/0.53mm, 2pt/0.71mm, 3pt/1.05mm, 4pt/1.42mm
Bevel type Center bevel / Long center bevel / Side bevel/ Long side bevel
Edge angle 42°,52° (Standard)
30 °, 46 °, 60°, 75° (Optional)

An extremely sharp edge facilitating less cutting pressure produced by a closely controlled, automated edge grinding process that achieves narrow height tolerances, the rules retain good bendability.

Suitable for diecutting plastics, electronics and tough materials

Dieflex® Fine Ground (FG )
Body hardness HV340 HV380 HV400 HV450
Edge hardness ~HV660 ~HV720
Height 20mm~50mm
Point 2pt/0.71mm, 3pt/1.05mm
Bevel type CB / LB / SB / LS
Edge angle 42°,52° (Standard)
30 °, 60°, 75° (Optional)

 

Dieflex® G12M

A rule for even more demanding materials such as brittle plastics. The very fine ground edge gives improved bendability compared with the standard ground edge rule. The extremely sharp edge means that less cutting pressure is required. There is also the benefit of reduced slivers, swarf and dust.

Dieflex® G12M
Body hardness HV340 HV380
Edge hardness ~HV660
Height 20mm~50mm
Point 2pt/0.71mm, 3pt/1.05mm
Bevel type CB / LB / SB / LS
Edge angle 42°,52° (Standard)
30 °, 60°, 75° (Optional)

 

Dieflex® Brite

Dieflex Brite combines an extremely sharp polished cutting edge with excellent bendability. A sharp, smooth bevel allows clean diecutting at lower pressures. Suitable for heavy duty diecutting of plastic laminated board, plastics (PE, PVC, PP, PET) and many electronic components.

 

Dieflex® Brite
Body hardness HV340 HV380
Edge hardness ~HV660
Height 20mm~25mm
Point 2pt/0.71mm, 3pt/1.05mm
Bevel type CB / LB
Edge angle 42°,52°

Dieflex coated edge rules combine a unique surface coating on an extremely sharp edge. They feature a smooth, level surface in order to reduce the coefficient of friction while maintaining the outstanding bendability of Dieflex rules. The cutting edge remains sharper for longer making the rules ideal for long, difficult runs.

A coated edge also gives easier penetration of the substrate and reduces dust/angel hair.

 

Dieflex® Platinum (PT)

A unique surface coating gives a combination of an extremely hard edge and smooth bevel surface to reduce coefficient of friction while maintaining typical Dieflex bendability. Dieflex Platinum is suitable for long diecutting runs on cigarette packaging and pharmaceutical packaging. It can also be utilized for diecutting tough materials such as abrasives, plastic laminated board and metalized polyester.

Dieflex® Platinum (PT)
Body hardness HV340 HV380
Edge hardness HV4000~HV5000
Height 20mm~50mm
Point 2pt/0.71mm, 3pt/1.05mm
Bevel type CB / LB
Edge angle 42°(Standard), 52° (Optional)

 

Dieflex® Ultra Coated

The inclusion of a smooth, thin coating on the rule bevel is designed to reduce friction. This allows diecutting at lower pressures and reduces dust/angel hair. Dieflex Ultra is suitable for diecutting recycled solid board, plastic laminated board and corrugated board where fibres are much shorter and have a tendency to break up (dusting) when diecutting with standard rules.

Dieflex® Ultra
Body hardness HV340 HV380
Edge hardness HV660
Height 20mm~50mm
Point 2pt/0.71mm, 3pt/1.05mm
Bevel type CB / LB
Edge angle 42°(Standard), 52° (Optional)

感謝您對我們的支持,若有任何疑問或寶貴的意見,歡迎您隨時與我們聯繫,客服人員將竭誠為您服務!