Products

Coated edge rules

Dieflex coated edge rules combine a unique surface coating on an extremely sharp edge. They feature a smooth, level surface in order to reduce the coefficient of friction while maintaining the outstanding bendability of Dieflex rules. The cutting edge remains sharper for longer making the rules ideal for long, difficult runs.

A coated edge also gives easier penetration of the substrate and reduces dust/angel hair.

 

Dieflex® Platinum (PT)

A unique surface coating gives a combination of an extremely hard edge and smooth bevel surface to reduce coefficient of friction while maintaining typical Dieflex bendability. Dieflex Platinum is suitable for long diecutting runs on cigarette packaging and pharmaceutical packaging. It can also be utilized for diecutting tough materials such as abrasives, plastic laminated board and metalized polyester.

Dieflex® Platinum (PT)
Body hardness HV340 HV380
Edge hardness HV4000~HV5000
Height 20mm~50mm
Point 2pt/0.71mm, 3pt/1.05mm
Bevel type CB / LB
Edge angle 42°(Standard), 52° (Optional)

 

Dieflex® Ultra Coated

The inclusion of a smooth, thin coating on the rule bevel is designed to reduce friction. This allows diecutting at lower pressures and reduces dust/angel hair. Dieflex Ultra is suitable for diecutting recycled solid board, plastic laminated board and corrugated board where fibres are much shorter and have a tendency to break up (dusting) when diecutting with standard rules.

Dieflex® Ultra
Body hardness HV340 HV380
Edge hardness HV660
Height 20mm~50mm
Point 2pt/0.71mm, 3pt/1.05mm
Bevel type CB / LB
Edge angle 42°(Standard), 52° (Optional)

感謝您對我們的支持,若有任何疑問或寶貴的意見,歡迎您隨時與我們聯繫,客服人員將竭誠為您服務!