Products

Ground edge rules

An extremely sharp edge facilitating less cutting pressure produced by a closely controlled, automated edge grinding process that achieves narrow height tolerances, the rules retain good bendability.

Suitable for diecutting plastics, electronics and tough materials

Dieflex® Fine Ground (FG )
Body hardness HV340 HV380 HV400 HV450
Edge hardness ~HV660 ~HV720
Height 20mm~50mm
Point 2pt/0.71mm, 3pt/1.05mm
Bevel type CB / LB / SB / LS
Edge angle 42°,52° (Standard)
30 °, 60°, 75° (Optional)

 

Dieflex® G12M

A rule for even more demanding materials such as brittle plastics. The very fine ground edge gives improved bendability compared with the standard ground edge rule. The extremely sharp edge means that less cutting pressure is required. There is also the benefit of reduced slivers, swarf and dust.

Dieflex® G12M
Body hardness HV340 HV380
Edge hardness ~HV660
Height 20mm~50mm
Point 2pt/0.71mm, 3pt/1.05mm
Bevel type CB / LB / SB / LS
Edge angle 42°,52° (Standard)
30 °, 60°, 75° (Optional)

 

Dieflex® Brite

Dieflex Brite combines an extremely sharp polished cutting edge with excellent bendability. A sharp, smooth bevel allows clean diecutting at lower pressures. Suitable for heavy duty diecutting of plastic laminated board, plastics (PE, PVC, PP, PET) and many electronic components.

 

Dieflex® Brite
Body hardness HV340 HV380
Edge hardness ~HV660
Height 20mm~25mm
Point 2pt/0.71mm, 3pt/1.05mm
Bevel type CB / LB
Edge angle 42°,52°

感謝您對我們的支持,若有任何疑問或寶貴的意見,歡迎您隨時與我們聯繫,客服人員將竭誠為您服務!