Products

Edge-hardened rules

Edge hardened cutting rules produced by super high frequency machines offering excellent cutting service life, together with the optimal decarburized raw material are suitable for diecutting application.

We have nine complete sets of 27.12 megahertz high-frequency machines with the most innovative technology made in Germany and Sweden.

Our maximum capacity is 150k meters per day.

Bright edge-hardened shaved rules with no dark scale on the surface are available.

• Normal edge hardened: up to HV660

• Deep edge hardened: up to HV720.

• Perforating rules: up to HV800

• Edge hardness can go up to HV1000 if required.

 

Dieflex®

Dieflex is the original edge hardened cutting rule for optimum wear resistance. Its hard, stable body and decarburized surface gives excellent bendability. It is suitable for diecutting common substrates including solid board and corrugated board.

Dieflex®
Body hardness HV340 HV380 HV400 HV450
Edge hardness ~HV660
Height 22mm~25mm
Point 1.27pt/0.45mm, 1.5pt/0.53mm, 2pt/0.71mm, 3pt/1.05mm, 4pt/1.42mm
Bevel type Center bevel / Long center bevel / Side bevel
Edge angle 42°,52° (Standard)
30 °, 46 °, 60°, 75° (Optional)

 

Dieflex® Deep Edge hardened (DEH)

An extra deep hardened rule tip further improves longevity of cutting life. Its hard, stable body and decarburized surface gives a good level of bendability. It is suitable for diecutting tough abrasive materials.

 

Dieflex® Deep Edge hardened (DEH)
Body hardness HV400
Edge hardness ~HV720
Height 22mm~50mm
Point 2pt/0.71mm, 3pt/1.05mm
Bevel type Center bevel / Long center bevel
Edge angle 42°,52° (Standard)

 

Dieflex® High Rule(HR)

Dieflex High Rule is an original edge hardened cutting rule for optimum wear resistance. Its hard, stable body and decarburized surface gives a good level of bendability. It is suitable for deep and clean diecutting of plastic (PE, PVC, PP, PET) and vacuum formed packaging.

Dieflex® High Rule(HR)
Body hardness HV400
Edge hardness ~HV660
Height 26mm~100mm
Point 2pt/0.71mm, 3pt/1.05mm, 4pt/1.42mm
Bevel type Center bevel / Long center bevel
Edge angle 42°,52° (Standard)

 

 

Saxon® SX340 SX380 SX400
Body hardness HV340 HV380 HV400
Edge hardness ~HV660 ~HV660 ~HV720
Height 22mm~50mm
Point 1.5pt/0.53mm, 2pt/0.71mm, 3pt/1.05mm, 4pt/1.42mm
Bevel type Center bevel / Long center bevel/ Side bevel
Edge angle 42°,52° (Standard)
30°, 46°, 60°, 75° (Optional)

 

  A80,S80 A55x80/S55x80
Body hardness HV360 HV400
Edge hardness ~HV660 ~HV720
Height 22mm~50mm
Point 1.5pt/0.53mm, 2pt/0.71mm, 3pt/1.05mm
Bevel type Center bevel / Long center bevel
Edge angle 42°,52° (Standard)
30°, 46°, 60°, 75° (Optional)

感謝您對我們的支持,若有任何疑問或寶貴的意見,歡迎您隨時與我們聯繫,客服人員將竭誠為您服務!